Openwell Submersible Pumps


LOW 365 Openwell Submersible Pump
Send Enquiry

Product Details

Type Openwell Submersible Pump
Model LOW-365
H.P. 3
Pipe Size 65x50 Cm
RPM 2880
Head in Feet 80
Phase 380V

Horizontal open well submersible pump set these single stage Centrifugal pump are ideally suitable for open well where there is wide fluctuation in water level. This works underwater & it rests at the well hence suction & priming problems do not arise. Prime mover motor is of wet type. Water lubricated, water cooled rewind able motor. The stator is wound with special water proof bi-axially oriented synthetic film insulated winding wires.

Motor

  • Water filled submersible induction motor.
  • S.S. 202 Grade motor body
  • S.S. 431 Grade motor shaft
  • Winding wire is tapping type having high resisting insulating capacity up to 5000 v as per BIS Standard.
  • Stamping is made of CRNO M-45 grade sheet having high silicon percentage which minimum the iron losses .
  • Motor bush it is made of LTB-4 as per BIS Standard...

Read More...


Yes! I am interested


LOW 366 Openwell Submersible Pump
Send Enquiry

Product Details

Type Openwell Submersible Pump
Model LOW-366
H.P. 3
Pipe Size 65x65 Cm
RPM 2880
Head in Feet 65
Phase 380V

Horizontal open well submersible pump set these single stage Centrifugal pump are ideally suitable for open well where there is wide fluctuation in water level. This works underwater & it rests at the well hence suction & priming problems do not arise. Prime mover motor is of wet type. Water lubricated, water cooled rewind able motor. The stator is wound with special water proof bi-axially oriented synthetic film insulated winding wires.

Motor

  • Water filled submersible induction motor.
  • S.S. 202 Grade motor body
  • S.S. 431 Grade motor shaft
  • Winding wire is tapping type having high resisting insulating capacity up to 5000 v as per BIS Standard.
  • Stamping is made of CRNO M-45 grade sheet having high silicon percentage which minimum the iron losses .
  • Motor bush it is made of LTB-4 as per BIS Standard...

Read More...


Yes! I am interested


LOW 565 Openwell Submersible Pump
Send Enquiry

Product Details

Type Openwell Submersible Pump
Model LOW-565
H.P. 5
Pipe Size 65x50 cm
RPM 2880
Head in Feet 100
Phase 380V

Horizontal open well submersible pump set these single stage Centrifugal pump are ideally suitable for open well where there is wide fluctuation in water level. This works underwater & it rests at the well hence suction & priming problems do not arise. Prime mover motor is of wet type. Water lubricated, water cooled rewind able motor. The stator is wound with special water proof bi-axially oriented synthetic film insulated winding wires.

Motor

  • Water filled submersible induction motor.
  • S.S. 202 Grade motor body
  • S.S. 431 Grade motor shaft
  • Winding wire is tapping type having high resisting insulating capacity up to 5000 v as per BIS Standard.
  • Stamping is made of CRNO M-45 grade sheet having high silicon percentage which minimum the iron losses .
  • Motor bush it is made of LTB-4 as per BIS Standard...

Read More...


Yes! I am interested


LOW 566 Openwell Submersible Pump
Send Enquiry

Product Details

Type Openwell Submersible Pump
Model LOW-566
H.P. 5
Pipe Size 65x65 Cm
RPM 2880
Head in Feet 80
Phase 380V

Horizontal open well submersible pump set these single stage Centrifugal pump are ideally suitable for open well where there is wide fluctuation in water level. This works underwater & it rests at the well hence suction & priming problems do not arise. Prime mover motor is of wet type. Water lubricated, water cooled rewind able motor. The stator is wound with special water proof bi-axially oriented synthetic film insulated winding wires.

Motor

  • Water filled submersible induction motor.
  • S.S. 202 Grade motor body
  • S.S. 431 Grade motor shaft
  • Winding wire is tapping type having high resisting insulating capacity up to 5000 v as per BIS Standard.
  • Stamping is made of CRNO M-45 grade sheet having high silicon percentage which minimum the iron losses .
  • Motor bush it is made of LTB-4 as per BIS Standard...

Read More...


Yes! I am interested


LOW 565HH Openwell Submersible Pump
Send Enquiry

Product Details

Type Openwell Submersible Pump
Model LOW-565HH
H.P. 5
Pipe Size 65x50 Cm
RPM 2880
Head in Feet 130
Phase 380V

Horizontal open well submersible pump set these single stage Centrifugal pump are ideally suitable for open well where there is wide fluctuation in water level. This works underwater & it rests at the well hence suction & priming problems do not arise. Prime mover motor is of wet type. Water lubricated, water cooled rewind able motor. The stator is wound with special water proof bi-axially oriented synthetic film insulated winding wires.

Motor

  • Water filled submersible induction motor.
  • S.S. 202 Grade motor body
  • S.S. 431 Grade motor shaft
  • Winding wire is tapping type having high resisting insulating capacity up to 5000 v as per BIS Standard.
  • Stamping is made of CRNO M-45 grade sheet having high silicon percentage which minimum the iron losses .
  • Motor bush it is made of LTB-4 as per BIS Standard...

Read More...


Yes! I am interested


LOW 576 Openwell Submersible Pump
Send Enquiry

Product Details

Type Openwell Submersible Pump
Model LOW-576
H.P. 5
Pipe Size 75x65 Cm
RPM 2880
Head in Feet 105
Phase 380V

Horizontal open well submersible pump set these single stage Centrifugal pump are ideally suitable for open well where there is wide fluctuation in water level. This works underwater & it rests at the well hence suction & priming problems do not arise. Prime mover motor is of wet type. Water lubricated, water cooled rewind able motor. The stator is wound with special water proof bi-axially oriented synthetic film insulated winding wires.

Motor

  • Water filled submersible induction motor.
  • S.S. 202 Grade motor body
  • S.S. 431 Grade motor shaft
  • Winding wire is tapping type having high resisting insulating capacity up to 5000 v as per BIS Standard.
  • Stamping is made of CRNO M-45 grade sheet having high silicon percentage which minimum the iron losses .
  • Motor bush it is made of LTB-4 as per BIS Standard...

Read More...


Yes! I am interested


LOW 7565 Openwell Submersible Pump
Send Enquiry

Product Details

Type Openwell Submersible Pump
Model LOW-7565
H.P. 7.50
Pipe Size 65x50 Cm
RPM 2880
Head in Feet 165
Phase 380V

Horizontal open well submersible pump set these single stage Centrifugal pump are ideally suitable for open well where there is wide fluctuation in water level. This works underwater & it rests at the well hence suction & priming problems do not arise. Prime mover motor is of wet type. Water lubricated, water cooled rewind able motor. The stator is wound with special water proof bi-axially oriented synthetic film insulated winding wires.

Motor

  • Water filled submersible induction motor.
  • S.S. 202 Grade motor body
  • S.S. 431 Grade motor shaft
  • Winding wire is tapping type having high resisting insulating capacity up to 5000 v as per BIS Standard.
  • Stamping is made of CRNO M-45 grade sheet having high silicon percentage which minimum the iron losses .
  • Motor bush it is made of LTB-4 as per BIS Standard...

Read More...


Yes! I am interested


LOW 0522LH Openwell Submersible Pump
Send Enquiry

Product Details

Type Openwell Submersible Pump
Model LOW-0522LH
H.P. 0.50
Pipe Size 25x25 cm
RPM 2880
Head in Feet 50
Phase Singal Phase 210V

Horizontal open well submersible pump set these single stage Centrifugal pump are ideally suitable for open well where there is wide fluctuation in water level. This works underwater & it rests at the well hence suction & priming problems do not arise. Prime mover motor is of wet type. Water lubricated, water cooled rewind able motor. The stator is wound with special water proof bi-axially oriented synthetic film insulated winding wires.

Motor

  • Water filled submersible induction motor.
  • S.S. 202 Grade motor body
  • S.S. 431 Grade motor shaft
  • Winding wire is tapping type having high resisting insulating capacity up to 5000 v as per BIS Standard.
  • Stamping is made of CRNO M-45 grade sheet having high silicon percentage which minimum the iron losses .
  • Motor bush it is made of LTB-4 as per BIS Standard...

Read More...


Yes! I am interested


LOW 0522 Openwell Submersible Pump
Send Enquiry

Product Details

Type Openwell Submersible Pump
Model LOW-0522
H.P. 0.50
Pipe Size 25x25 cm
RPM 2880
Head in Feet 65
Phase Singal Phase 210V

Horizontal open well submersible pump set these single stage Centrifugal pump are ideally suitable for open well where there is wide fluctuation in water level. This works underwater & it rests at the well hence suction & priming problems do not arise. Prime mover motor is of wet type. Water lubricated, water cooled rewind able motor. The stator is wound with special water proof bi-axially oriented synthetic film insulated winding wires.

Motor

  • Water filled submersible induction motor.
  • S.S. 202 Grade motor body
  • S.S. 431 Grade motor shaft
  • Winding wire is tapping type having high resisting insulating capacity up to 5000 v as per BIS Standard.
  • Stamping is made of CRNO M-45 grade sheet having high silicon percentage which minimum the iron losses .
  • Motor bush it is made of LTB-4 as per BIS Standard...

Read More...


Yes! I am interested


LOW 132 Openwell Submersible Pump
Send Enquiry

Product Details

Type Openwell Submersible Pump
Model LOW-132
H.P. 1
Pipe Size 32x25 cm
RPM 2880
Head in Feet 80
Phase Singal Phase 210V

Horizontal open well submersible pump set these single stage Centrifugal pump are ideally suitable for open well where there is wide fluctuation in water level. This works underwater & it rests at the well hence suction & priming problems do not arise. Prime mover motor is of wet type. Water lubricated, water cooled rewind able motor. The stator is wound with special water proof bi-axially oriented synthetic film insulated winding wires.

Motor

  • Water filled submersible induction motor.
  • S.S. 202 Grade motor body
  • S.S. 431 Grade motor shaft
  • Winding wire is tapping type having high resisting insulating capacity up to 5000 v as per BIS Standard.
  • Stamping is made of CRNO M-45 grade sheet having high silicon percentage which minimum the iron losses .
  • Motor bush it is made of LTB-4 as per BIS Standard...

Read More...


Yes! I am interested


LOW 155 Openwell Submersible Pump
Send Enquiry

Product Details

Type Openwell Submersible Pump
Model LOW-155
H.P. 1
Pipe Size 50x50 cm
RPM 2880
Head in Feet 60
Phase Singal Phase 210V

Horizontal open well submersible pump set these single stage Centrifugal pump are ideally suitable for open well where there is wide fluctuation in water level. This works underwater & it rests at the well hence suction & priming problems do not arise. Prime mover motor is of wet type. Water lubricated, water cooled rewind able motor. The stator is wound with special water proof bi-axially oriented synthetic film insulated winding wires.

Motor

  • Water filled submersible induction motor.
  • S.S. 202 Grade motor body
  • S.S. 431 Grade motor shaft
  • Winding wire is tapping type having high resisting insulating capacity up to 5000 v as per BIS Standard.
  • Stamping is made of CRNO M-45 grade sheet having high silicon percentage which minimum the iron losses .
  • Motor bush it is made of LTB-4 as per BIS Standard...

Read More...


Yes! I am interested


LOW 254 Openwell Submersible Pump
Send Enquiry

Product Details

Type Openwell Submersible Pump
Model LOW-254
H.P. 2
Pipe Size 50x40 cm
RPM 2880
Head in Feet 100
Phase Singal Phase 210V

Horizontal open well submersible pump set these single stage Centrifugal pump are ideally suitable for open well where there is wide fluctuation in water level. This works underwater & it rests at the well hence suction & priming problems do not arise. Prime mover motor is of wet type. Water lubricated, water cooled rewind able motor. The stator is wound with special water proof bi-axially oriented synthetic film insulated winding wires.

Motor

  • Water filled submersible induction motor.
  • S.S. 202 Grade motor body
  • S.S. 431 Grade motor shaft
  • Winding wire is tapping type having high resisting insulating capacity up to 5000 v as per BIS Standard.
  • Stamping is made of CRNO M-45 grade sheet having high silicon percentage which minimum the iron losses .
  • Motor bush it is made of LTB-4 as per BIS Standard...

Read More...


Yes! I am interested


LOW 255 Openwell Submersible Pump
Send Enquiry

Product Details

Type Openwell Submersible Pump
Model LOW-255
H.P. 2
Pipe Size 50x50 cm
RPM 2880
Head in Feet 85
Phase Singal Phase 210V

Horizontal open well submersible pump set these single stage Centrifugal pump are ideally suitable for open well where there is wide fluctuation in water level. This works underwater & it rests at the well hence suction & priming problems do not arise. Prime mover motor is of wet type. Water lubricated, water cooled rewind able motor. The stator is wound with special water proof bi-axially oriented synthetic film insulated winding wires.

Motor

  • Water filled submersible induction motor.
  • S.S. 202 Grade motor body
  • S.S. 431 Grade motor shaft
  • Winding wire is tapping type having high resisting insulating capacity up to 5000 v as per BIS Standard.
  • Stamping is made of CRNO M-45 grade sheet having high silicon percentage which minimum the iron losses .
  • Motor bush it is made of LTB-4 as per BIS Standard...

Read More...


Yes! I am interested


LOW 265 Openwell Submersible Pump
Send Enquiry

Product Details

Type Openwell Submersible Pump
Model LOW-265
H.P. 2
Pipe Size 65x50 Cm
RPM 2880
Head in Feet 65
Phase Singal Phase 210V

Horizontal open well submersible pump set these single stage Centrifugal pump are ideally suitable for open well where there is wide fluctuation in water level. This works underwater & it rests at the well hence suction & priming problems do not arise. Prime mover motor is of wet type. Water lubricated, water cooled rewind able motor. The stator is wound with special water proof bi-axially oriented synthetic film insulated winding wires.

Motor

  • Water filled submersible induction motor.
  • S.S. 202 Grade motor body
  • S.S. 431 Grade motor shaft
  • Winding wire is tapping type having high resisting insulating capacity up to 5000 v as per BIS Standard.
  • Stamping is made of CRNO M-45 grade sheet having high silicon percentage which minimum the iron losses .
  • Motor bush it is made of LTB-4 as per BIS Standard...

Read More...


Yes! I am interested


LOW 355 Openwell Submersible Pump
Send Enquiry

Product Details

Type Openwell Submersible Pump
Model LOW-355
H.P. 3
Pipe Size 50x50
RPM 2880
Head in Feet 100
Phase Singal Phase 210V

•Horizontal open well submersible pump set these single stage Centrifugal pump are ideally suitable for open well where there is wide fluctuation in water level. This works underwater & it rests at the well hence suction & priming problems do not arise. Prime mover motor is of wet type. Water lubricated, water cooled rewind able motor. The stator is wound with special water proof bi-axially oriented synthetic film insulated winding wires.

Motor

  • Water filled submersible induction motor.
  • S.S. 202 Grade motor body
  • S.S. 431 Grade motor shaft
  • Winding wire is tapping type having high resisting insulating capacity up to 5000 v as per BIS Standard.
  • Stamping is made of CRNO M-45 grade sheet having high silicon percentage which minimum the iron losses .
  • Motor bush it is made of LTB-4 as per BIS St...

Read More...


Yes! I am interested


LOW 388 Openwell Submersible Pump
Send Enquiry

Product Details

Type Openwell Submersible Pump
Model LOW-388
H.P. 3
Pipe Size 80x80
Rpm 2880
Head in Feet 55
Phase Singal Phase 210V

Horizontal open well submersible pump set these single stage Centrifugal pump are ideally suitable for open well where there is wide fluctuation in water level. This works underwater & it rests at the well hence suction & priming problems do not arise. Prime mover motor is of wet type. Water lubricated, water cooled rewind able motor. The stator is wound with special water proof bi-axially oriented synthetic film insulated winding wires.

Motor

  • Water filled submersible induction motor.
  • S.S. 202 Grade motor body
  • S.S. 431 Grade motor shaft
  • Winding wire is tapping type having high resisting insulating capacity up to 5000 v as per BIS Standard.
  • Stamping is made of CRNO M-45 grade sheet having high silicon percentage which minimum the iron losses .
  • Motor bush it is made of LTB-4 as per BIS Standard...

Read More...


Yes! I am interested


LOW 365DP Openwell Submersible Pump
Send Enquiry

Product Details

Type Openwell Submersible Pump
Model LOW-365DP
H.P. 3
Pipe Size 65x50
RPM 2880
Head in Feet 80
Phase Singal Phase 210V

Horizontal open well submersible pump set these single stage Centrifugal pump are ideally suitable for open well where there is wide fluctuation in water level. This works underwater & it rests at the well hence suction & priming problems do not arise. Prime mover motor is of wet type. Water lubricated, water cooled rewind able motor. The stator is wound with special water proof bi-axially oriented synthetic film insulated winding wires.

Motor

  • Water filled submersible induction motor.
  • S.S. 202 Grade motor body
  • S.S. 431 Grade motor shaft
  • Winding wire is tapping type having high resisting insulating capacity up to 5000 v as per BIS Standard.
  • Stamping is made of CRNO M-45 grade sheet having high silicon percentage which minimum the iron losses .
  • Motor bush it is made of LTB-4 as per BIS Standard...

Read More...


Yes! I am interested


LOW 366DP Openwell Submersible Pump
Send Enquiry

Product Details

Type Openwell Submersible Pump
Model LOW-366DP
H.P. 3
Pipe Size 65x65
RPM 2880
Head in Feet 65
Phase Singal Phase 210V

Horizontal open well submersible pump set these single stage Centrifugal pump are ideally suitable for open well where there is wide fluctuation in water level. This works underwater & it rests at the well hence suction & priming problems do not arise. Prime mover motor is of wet type. Water lubricated, water cooled rewind able motor. The stator is wound with special water proof bi-axially oriented synthetic film insulated winding wires.

Motor

  • Water filled submersible induction motor.
  • S.S. 202 Grade motor body
  • S.S. 431 Grade motor shaft
  • Winding wire is tapping type having high resisting insulating capacity up to 5000 v as per BIS Standard.
  • Stamping is made of CRNO M-45 grade sheet having high silicon percentage which minimum the iron losses .
  • Motor bush it is made of LTB-4 as per BIS Standard...

Read More...


Yes! I am interested


LOW 565DP Openwell Submersible Pump
Send Enquiry

Product Details

Type Openwell Submersible Pump
Model LOW-565DP
H.P. 0.50
Pipe Size 65x50
RPM 2880
Head in Feet 100
Phase Singal Phase 210V

Horizontal open well submersible pump set these single stage Centrifugal pump are ideally suitable for open well where there is wide fluctuation in water level. This works underwater & it rests at the well hence suction & priming problems do not arise. Prime mover motor is of wet type. Water lubricated, water cooled rewind able motor. The stator is wound with special water proof bi-axially oriented synthetic film insulated winding wires.

Motor

  • Water filled submersible induction motor.
  • S.S. 202 Grade motor body
  • S.S. 431 Grade motor shaft
  • Winding wire is tapping type having high resisting insulating capacity up to 5000 v as per BIS Standard.
  • Stamping is made of CRNO M-45 grade sheet having high silicon percentage which minimum the iron losses .
  • Motor bush it is made of LTB-4 as per BIS Standard...

Read More...


Yes! I am interested


LOW 566DP Openwell Submersible Pump
Send Enquiry

Product Details

Type Openwell Submersible Pump
Model LOW-566DP
H.P. 5
Pipe Size 65x65 mm
RPM 2880
Head in Feet 80
Phase Singal Phase 210V

Horizontal open well submersible pump set these single stage Centrifugal pump are ideally suitable for open well where there is wide fluctuation in water level. This works underwater & it rests at the well hence suction & priming problems do not arise. Prime mover motor is of wet type. Water lubricated, water cooled rewind able motor. The stator is wound with special water proof bi-axially oriented synthetic film insulated winding wires.

Motor

  • Water filled submersible induction motor.
  • S.S. 202 Grade motor body
  • S.S. 431 Grade motor shaft
  • Winding wire is tapping type having high resisting insulating capacity up to 5000 v as per BIS Standard.
  • Stamping is made of CRNO M-45 grade sheet having high silicon percentage which minimum the iron losses .
  • Motor bush it is made of LTB-4 as per BIS Standard...

Read More...


Yes! I am interested



Looking for Product Name ?